Hydraulics of overland flow influenced by litter incorporation under extreme rainfall     

Lunjiang Wang  Guanghui Zhang  Xue Wang  Xiaoyan Li 《水文研究》2019,33(5):737-747

Water erosion on hillslopes is a worldwide environmental problem, which is a rainfall‐induced process, especially extreme rainfall. The great intensity of extreme rainfall strongly enhances the power of overland flow to detach soil and transport sediment. Plant litter is one of the most important constituents of ecosystems that often covers the soil surface and can be incorporated into topsoil. However, little attention has been paid to its effect on flow hydraulics owing to the veiled nature. This study aimed to examine the effects of incorporated litter on the hydraulic properties under extreme rainfall condition. To reach this goal, six litter rates of 0, 0.05, 0.10, 0.20, 0.35, and 0.50 kg m^?2 and four litter types collected from deciduous trees, coniferous trees, shrubs, and herbs were incorporated into topsoil. Then, simulated rainfall experiments were performed on five slope gradients (5°, 10°, 15°, 20°, and 25°) with an extreme rainfall intensity of 80 mm h^?1. The results showed that Froude number and flow velocity of the overland flow decreased, whereas flow resistance increased exponentially with litter incorporation rate. Litter type had an influence on flow hydraulics, which can mainly be attributed to the variations in surface coverage of the exposed litter and the litter morphology. Flow velocity and Darcy–Weisbach coefficient increased markedly with slope gradient. However, the variation of slope gradient did not modify the relationships between flow hydraulics and incorporated litter rate. The random roughness, resulting from heterogeneous erosion due to the uneven protection of surface exposed litter, increased linearly with litter incorporated rate. As rainfall proceeded, flow hydraulics varied with incorporated litter rate and slope gradient complicatedly due to the increases in flow rate and coverage of the exposed litter and the modification of soil surface roughness.  相似文献   

Seasonal variations in infiltrability of moss‐dominated biocrusts on aeolian sand and loess soil in the Chinese Loess Plateau     

Bo Xiao  Fuhai Sun  Xiaomeng Yao  Kelin Hu  Giora J. Kidron 《水文研究》2019,33(18):2449-2463

Biocrust effects on soil infiltration have attracted increasing attention in dryland ecosystems, but their seasonal variations in infiltrability have not yet been well understood. On the Chinese Loess Plateau, soil infiltrability indicated by saturated hydraulic conductivity (K_s) of biocrusts and bare soil, both on aeolian sand and loess soil, was determined by disc infiltrometer in late spring (SPR), midsummer (SUM), and early fall (FAL). Then their correlations with soil biological and physiochemical properties and water repellency index (RI) were analysed. The results showed that the biocrusts significantly decreased K_s both on sand during SPR, SUM, and FAL (by 43%, 66%, and 35%, respectively; P < .05) and on loess (by 42%, 92%, and 10%, respectively; P <.05). As compared with the bare soil, the decreased K_s in the biocrusted surfaces was mostly attributed to the microorganism biomass and also to the increasing content of fine particles and organic matter. Most importantly, both the biocrusts and bare soil exhibited significant (F ≥ 11.89, P ≤ .003) seasonal variations in K_s, but their patterns were quite different. Specifically, the K_s of bare soil gradually decreased from SPR to SUM (32% and 42% for sand and loess, respectively) and FAL (29% and 39%); the K_s of biocrusts also decreased from SPR to SUM (59% and 92%) but then increased in FAL (36% and 588%). Whereas the seasonal variations in K_s of the biocrusts were closely correlated with the seasonal variations in RI, the RI values were not high enough to point at hydrophobicity. Instead of that, the seasonal variations of K_s were principally explained by the changes in the crust biomass and possibly by the microbial exopolysaccharides. We conclude that the biocrusts significantly decreased soil infiltrability and exhibited a different seasonal variation pattern, which should be carefully considered in future analyses of hydropedological processes.  相似文献   

Identification of groundwater mean transit times of precipitation and riverbank infiltration by two‐component lumped parameter models     

Nguyen Le Duy  Nguyen Viet Dung  Ingo Heidbüchel  Hanno Meyer  Markus Weiler  Bruno Merz  Heiko Apel 《水文研究》2019,33(24):3098-3118

Groundwater transit time is an essential hydrologic metric for groundwater resources management. However, especially in tropical environments, studies on the transit time distribution (TTD) of groundwater infiltration and its corresponding mean transit time (mTT) have been extremely limited due to data sparsity. In this study, we primarily use stable isotopes to examine the TTDs and their mTTs of both vertical and horizontal infiltration at a riverbank infiltration area in the Vietnamese Mekong Delta (VMD), representative of the tropical climate in Asian monsoon regions. Precipitation, river water, groundwater, and local ponding surface water were sampled for 3 to 9 years and analysed for stable isotopes (δ¹⁸O and δ²H), providing a unique data set of stable isotope records for a tropical region. We quantified the contribution that the two sources contributed to the local shallow groundwater by a novel concept of two‐component lumped parameter models (LPMs) that are solved using δ¹⁸O records. The study illustrates that two‐component LPMs, in conjunction with hydrological and isotopic measurements, are able to identify subsurface flow conditions and water mixing at riverbank infiltration systems. However, the predictive skill and the reliability of the models decrease for locations farther from the river, where recharge by precipitation dominates, and a low‐permeable aquitard layer above the highly permeable aquifer is present. This specific setting impairs the identifiability of model parameters. For river infiltration, short mTTs (<40 weeks) were determined for sites closer to the river (<200 m), whereas for the precipitation infiltration, the mTTs were longer (>80 weeks) and independent of the distance to the river. The results not only enhance the understanding of the groundwater recharge dynamics in the VMD but also suggest that the highly complex mechanisms of surface–groundwater interaction can be conceptualized by exploiting two‐component LPMs in general. The model concept could thus be a powerful tool for better understanding both the hydrological functioning of mixing processes and the movement of different water components in riverbank infiltration systems.  相似文献   

An analytical approach to ascertain saturation‐excess versus infiltration‐excess overland flow in urban and reference landscapes     

Ryan D. Stewart  Aditi S. Bhaskar  Anthony J. Parolari  Dustin L. Herrmann  Jinshi Jian  Laura A. Schifman  William D. Shuster 《水文研究》2019,33(26):3349-3363

Uncontrolled overland flow drives flooding, erosion, and contaminant transport, with the severity of these outcomes often amplified in urban areas. In pervious media such as urban soils, overland flow is initiated via either infiltration‐excess (where precipitation rate exceeds infiltration capacity) or saturation‐excess (when precipitation volume exceeds soil profile storage) mechanisms. These processes call for different management strategies, making it important for municipalities to discern between them. In this study, we derived a generalized one‐dimensional model that distinguishes between infiltration‐excess overland flow (IEOF) and saturation‐excess overland flow (SEOF) using Green–Ampt infiltration concepts. Next, we applied this model to estimate overland flow generation from pervious areas in 11 U.S. cities. We used rainfall forcing that represented low‐ and high‐intensity events and compared responses among measured urban versus predevelopment reference soil hydraulic properties. The derivation showed that the propensity for IEOF versus SEOF is related to the equivalence between two nondimensional ratios: (a) precipitation rate to depth‐weighted hydraulic conductivity and (b) depth of soil profile restrictive layer to soil capillary potential. Across all cities, reference soil profiles were associated with greater IEOF for the high‐intensity set of storms, and urbanized soil profiles tended towards production of SEOF during the lower intensity set of storms. Urban soils produced more cumulative overland flow as a fraction of cumulative precipitation than did reference soils, particularly under conditions associated with SEOF. These results will assist cities in identifying the type and extent of interventions needed to manage storm water produced from pervious areas.  相似文献   

Bound and mobile soil water isotope ratios are affected by soil texture and mineralogy,whereas extraction method influences their measurement     

Rachel E. Adams  Ayumi Hyodo  Toby SantaMaria  Cynthia L. Wright  Thomas W. Boutton  Jason B. West 《水文研究》2020,34(4):991-1003

Questions persist about interpreting isotope ratios of bound and mobile soil water pools, particularly relative to clay content and extraction conditions. Interactions between pools and resulting extracted water isotope composition are presumably related to soil texture, yet few studies have manipulated the bound pool to understand its influence on soil water processes. Using a series of drying and spiking experiments, we effectively labelled bound and mobile water pools in soils with varying clay content. Soils were first vacuum dried to remove residual water, which was then replaced with heavy isotope-enriched water prior to oven drying and spiking with heavy isotope-depleted water. Water was extracted via centrifugation or cryogenic vacuum distillation (at four temperatures) and analysed for oxygen and hydrogen isotope ratios via isotope ratio mass spectrometry. Water from centrifuged samples fell along a mixing line between the two added waters but was more enriched in heavy isotopes than the depleted label, demonstrating that despite oven drying, a residual pool remains and mixes with the mobile water. Soils with higher clay + silt content appeared to have a larger bound pool. Water from vacuum distillation samples have a significant temperature effect, with high temperature extractions yielding progressively more heavy isotope-enriched values, suggesting that Rayleigh fractionation occurred at low temperatures in the vacuum line. By distinctly labelling bound and mobile soil water pools, we detected interactions between the two that were dependent on soil texture. Although neither extraction method appeared to completely extract the combined bound and mobile (total water) pool, centrifugation and high temperature cryogenic vacuum distillations were comparable for both δ²H and δ¹⁸O of soil water isotope ratios.  相似文献   

考虑桩间土体抗滑作用的单排抗滑桩受力计算方法          下载免费PDF全文

肖世国 《中国地质灾害与防治学报》2020,31(1):89-94

为了充分考虑桩间距范围内滑体对抗滑桩受力的影响,从单排抗滑桩加固边坡的整体稳定角度出发,在采用传递系数法分析指定设计安全系数情况下抗滑桩的内力时,提出对一个桩间距范围内的加固坡体进行整体分析,将抗滑桩所在部位单独划分条块,该条块包括桩体受荷段及其两侧桩间距范围内的滑体。推导了与此分析模型相应的桩体受荷段底端内力计算公式,并给出了在滑坡推力线性分布条件下作用于受荷段的净滑坡推力计算表达式。分析结果显示,在不考虑与完全考虑受荷段两侧桩间距范围内滑体抗力作用时,得到是桩体内力及位移的上、下边界值。实例分析进一步表明,理论分析与数值模拟结果具有良好的一致性。所提出的方法比传统方法更有利于抗滑桩设计的经济性。  相似文献   

A plasticity constitutive model for unsaturated,anisotropic, nonexpansive soils     

Panagiotis Sitarenios  Michael Kavvadas 《国际地质力学数值与分析法杂志》2020,44(4):435-454

The paper describes and evaluates an incremental plasticity constitutive model for unsaturated, anisotropic, nonexpansive soils (CMUA). It is based on the modified Cam-Clay (MCC) model for saturated soils and enhances it by introducing anisotropy (via rotation of the MCC yield surface) and an unsaturated compressibility framework describing a double dependence of compressibility on suction and on the degree of saturation of macroporosity. As the anisotropic and unsaturated features can be activated independently, the model is downwards compatible with the MCC model. The CMUA model can simulate effectively: the dependence of compressibility on the level of developed anisotropy, uniqueness of critical state independent of the initial anisotropy, an evolving compressibility during constant suction compression, and a maximum of collapse. The model uses Bishop's average skeleton stress as its first constitutive variable, favouring its numerical implementation in commercial numerical analysis codes (eg, finite element codes) and a unified treatment of saturated and unsaturated material states.  相似文献   

内蒙古鄂伦春旗东部主要农耕区土壤有机碳含量及主要影响因素分析     

贺鹏飞  魏明辉  李秋燕  张哲寰  许江 《地质与资源》2020,29(6):574-578

利用鄂伦春自治旗东部主要耕地区1：25万土地质量地球化学调查数据，查明了研究区内表层和深层土壤有机碳储量和有机碳密度分布特征，分析了研究区内土壤有机碳储量、有机碳密度与土壤类型、土地利用方式之间的关系，探讨了土壤类型和土地利用方式对土壤有机碳的作用机理.结果表明研究区内土壤有机碳含量分布不均，土壤类型和土地利用方式是土壤有机碳储量和有机碳密度的主要影响因素.  相似文献   

浮力装置触发深海管道水平向整体屈曲效果的数值模拟研究     

曹洋  张淑华  孙林 《海洋通报》2019,38(6):719-726

海洋油气资源的运输主要通过海底管道进行,管道在工作时受到较大的温度荷载,会产生整体屈曲变形。深海管道设计中常采用人为装置触发一定程度的水平向整体屈曲变形,来释放轴向的温度应力,浮力装置是常用的触发方式之一。本文通过数值模拟研究,分析了不同浮力大小和不同浮力施加范围下,管道水平向整体屈曲的临界屈曲力,得出临界屈曲力随浮力大小和施加范围变化的情况;并研究了不同土体阻力下,浮力装置触发整体屈曲的效果。研究表明,水平向土体阻力较大时,浮力装置触发水平向整体屈曲的效果较好。浮力装置的触发效果对轴向土体阻力不敏感。  相似文献   

Calibration method affects the measured δ2H and δ18O in soil water by direct H2Oliquid–H2Ovapour equilibration with laser spectroscopy     

Hongxiu Wang  Bingcheng Si  Dyan Pratt  Han Li  Xiaojun Ma 《水文研究》2020,34(2):506-516

The direct H₂O_liquid–H₂O_vapour equilibration method utilizing laser spectroscopy (DVE-LS) is a way to measure soil pore water stable isotopes. Various equilibration times and calibration methods have been used in DVE-LS. Yet little is known about their effects on the accuracy of the obtained isotope values. The objective of this study was to evaluate how equilibration time and calibration methods affect the accuracy of DVE-LS. We did both spiking and field soil experiments. For the spiking experiment, we applied DVE-LS to four soils of different textures, each of which was subjected to five water contents and six equilibration times. For the field soil experiment, we applied three calibration methods for DVE-LS to two field soil profiles, and the results were compared with cryogenic vacuum distillation (CVD)-LS. Results showed that DVE-LS demonstrated higher δ²H and δ¹⁸O as equilibration time increased, but 12 to 24 hr could be used as optimal equilibration time. For field soil samples, DVE-LS with liquid waters as standards led to significantly higher δ²H and δ¹⁸O than CVD-LS, with root mean square error (RMSE) of 8.06‰ for δ²H and 0.98‰ for δ¹⁸O. Calibration with soil texture reduced RMSE to 3.53‰ and 0.72‰ for δ²H and δ¹⁸O, respectively. Further, calibration with both soil texture and water content decreased RMSE to 3.10‰ for δ²H and 0.73‰ for δ¹⁸O. Our findings conclude that the calibration method applied may affect the measured soil water isotope values from DVE-LS.  相似文献